News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Water Pump wont turn on? Any suggesttions on any fuses....

Started by eddie76clipper, February 09, 2011, 06:40:33 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

eddie76clipper

February 09, 2011, 06:40:33 PM
Hello,

I have a 1976 American Clipper just recently took it in to replace the carb and my mechanic hooked up the outlet cable that lights up the inside and also turns the water pump on; however the current issue now is that it seems not enough electricity is running through since the dash light that indicates if power is full now states low.

Any suggestions on any fuses that might be the issue?

By the way kind of new to this link; hello everyone!

Thanks,

Eddie

John Eversoll

#1
February 10, 2011, 01:32:02 AM


Hi Eddie, start checking the ground.. Bad ground No workie goodie

I would just replace the pump myself and hope that it was just on it's way to the trash can..

But then Jerry or Horst might have a better idea for you to check...

John Out"

eddie76clipper

#2
February 10, 2011, 09:44:24 AM
Hi John,

Thanks; it seems the original owner replaced the water pump just by looking at it. It might be something else more than likely having to do with some kind of fuse or the cable that hooks up to the 112V Outlet?

I'm not sure? Working fine but then took a dump....What's funny about this whole thing is that before the inside lights wouldn't turn on when the clipper was on and now they do but the pump wont run. Something may be reversed here..
Print
Go Up Pages1
User actions