News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Kitchen Faucet Repair

Started by buckeyefan, November 20, 2010, 12:13:16 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

buckeyefan

November 20, 2010, 12:13:16 PM
I can not figure out how to get to the o-rings to change them. After removing the handle and sliding off the sleeve I do not know what to do to get to the o-rings. Any help would be appreciated.

JerryT

#1
November 23, 2010, 09:06:44 PM
Wish I could help but my Clipper already had the faucet changed when I got it. I have worked on some home brands and the big O-rings were inside the swivel spout and the little O-rings were on the bottom of the part the handle moved around. It was held in place by a small threaded part. Good luck.
JerryT

buckeyefan

#2
November 28, 2010, 05:07:37 PM
I have decided to modernize my faucet with a Moen 7423. I seen from other postings that this faucet is a good fit with minor modification.
Print
Go Up Pages1
User actions