News:

The club is no longer active.  The forum will continue to be available for folks to find information and ask for help.
The tech forums are now open to all.  Other vintage Dodge-based class C owners welcome.

Main Menu

parting out clipper

Started by chrissharon, August 12, 2010, 08:54:51 AM

Previous topic - Next topic

chrissharon

Parting out my 1976 clipper.It's a 1976 821F rear kitchen model. With a 440 motor the motor was rebuilt 10,000 miles ago.
The bad, I started to fix the sag in the floor under the kitchen, all along the rear of the motor home. I took out the kitchen the oven /stove was working when i removed it. After that i replaced the support that runs the width of the coach. I then looked at the coach door and saw it needed to be square, this is were i stopped. The floor inside needs to be replaced all along the rear of the coach. The Good i replaced the flusher on the toilet,in 2004 we had new over load springs installed and bushings replaced. the generator works good it's a 4000 onan the roof had a leek in it i fixed that. The body is in great condition. I also have a lot of paper work for the motor home inside and out.  From what i found out this Clipper has all the bells.  Please call 360-695-0659 or e-mail christophergre@msn.com