News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

parting out clipper

Started by chrissharon, August 12, 2010, 08:54:51 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chrissharon

August 12, 2010, 08:54:51 AM Last Edit: August 15, 2010, 10:41:48 AM by chris&sharon
Parting out my 1976 clipper.It's a 1976 821F rear kitchen model. With a 440 motor the motor was rebuilt 10,000 miles ago.
The bad, I started to fix the sag in the floor under the kitchen, all along the rear of the motor home. I took out the kitchen the oven /stove was working when i removed it. After that i replaced the support that runs the width of the coach. I then looked at the coach door and saw it needed to be square, this is were i stopped. The floor inside needs to be replaced all along the rear of the coach. The Good i replaced the flusher on the toilet,in 2004 we had new over load springs installed and bushings replaced. the generator works good it's a 4000 onan the roof had a leek in it i fixed that. The body is in great condition. I also have a lot of paper work for the motor home inside and out.  From what i found out this Clipper has all the bells.  Please call 360-695-0659 or e-mail christophergre@msn.com
Print
Go Up Pages1
User actions