News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

outside vent needed

Started by Larry Lund, July 12, 2002, 03:28:00 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Larry Lund

July 12, 2002, 03:28:00 PM
My outside stove vent cover on the side kitchen model recently fell apart.  Does anyone know where I can find one.

     Sincerely,Larry

mollerus

#1
July 14, 2002, 02:59:00 PM
Hi Larry,  Save all the pieces and take them to a welding shop that works with aluminum. They can fabricate a suitable replacement from 1/8" aluminum and you will never again have to worry about the sunlight UV deteriorating the plastic like on the original.  Small one or two man shops will often take on the smaller jobs at a reasonable cost that the big shops will only do for lots of bucks. I've never seen replacement vents offered in RV stores.

Mark Smith

#2
July 14, 2002, 05:23:00 PM
I replaced mine from the ACOC Jr. trailor store. It was an exact copy of the original vent. However, I did have to trim off the back of the vent with a hack saw to make it fit flush to the motorhome wall.
Mark ACOC#1077
Print
Go Up Pages1
User actions