News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Rear Kitchen Lavatory Sink

Started by HPotter, April 23, 2002, 08:14:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

HPotter

April 23, 2002, 08:14:00 AM
The original lavatory sink faucet in our '77 RK model deteriorated to where a replacement was necessary. I replaced it with a slightly larger bar sink fixture with 4 inch spacing between the inlets. This required installation of brass adaptors to match the water line connections to the faucet. These were readily available at our local plumbing supply. The best part of the job was finding out that the entire sink cabinet can be removed by simply backing out two screws at the left rear corner inside the cabinet plus two more at the front right corner, leaving the sink in place. This gives easy access to the water connections.
Harold, #886
Print
Go Up Pages1
User actions