my free clipper

[joedkai]

guy wanted this out of his yard...I got it home got it running runs very good but the old gas made the valves sticky and bent some push rods...I am currently rebuilding the top end without removing the heads...all the valve have been freed up and I bought new push rods lifters and gaskets removed the tank and cleaned it bought new calipers wires plugs master cylinder and many other parts...anyone know where to get a new pickup tube/sending unit for the gas tank ? this one is shot...thanks

[Toedtoes]

You can send in your old one to http://tristarrradiator.com/ and he will rebuild it for you.  I did it and it works great.  Cost was very reasonable too.

Congrats on the free deal.

Be sure to replace all rubber (hoses, belts, tires, fuel lines, etc.) - even if you can't see any damage, the fuel lines are often full of pinholes.  And get the propane system checked to make sure there aren't any leaks there.  Those are the biggest safest issues.

Looks like there might have been/currently is leaking in the overhead by the front window.  Check it carefully and re-seal everything before the rains.  You'll save a lot of trouble later on.

[rvguy101]

 he rebuild my. & was about $ 150 for my.

[joedkai]

I'm going to rebuild it myself for about $20

[rvguy101]

can i ask, where u got the parts from for it ?,. i have a old 77, that the sending unit have a mind of it own,.