News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

440-engine cutting out

Started by ksman, August 24, 2003, 01:49:00 AM

Previous topic - Next topic

ksman

engine cuts out like it is fuel starved.this problem just started, when climing hills it misses an cuts out, can put it in a lower gear an it picks back up, but as soon as shifted into drive it`s the same story. Does this sound like a bad fuel pump or hopely a fuel filter? My clipper is a 1978-440cu-in, untill this problem, she has always ran great.

handyman

Ksman you have the right idea it does sound like fuel starvation I had the same problem about ten years ago and it was the filter, if you havent got one yet get a elec fuel pump mount it bye the tank with another filter between it and the tank itll also stop alot of the dreaded vapor lock  

EKS

We went with a permacool fuel filter (summit racing part # PRM-81794)that is somewhat oversize but given the age of the fuel tank and the chance for rust we decide too big was better than too small. It is about $32. The fact that it is also a water separator appealed to us.

junebob

Member-383, Cutting out. I concur with the other reply. Change your fuel filter    
Bob Chaney

ksman

thank you all for the infomation, will put on a electric fuel pump an another fuel filter, thanks again,  the ksman

Guinnessecco

Could be ignition.  In lower gear at part throttle there is less pressure in the cylinders which means a lower voltage spark will be sufficient to jump the gap on a spark plug.  My guess is a coil that is shorting out internally. Could be a crack on a distributor cap or rotor, or spark plug wires that are old with a break in the insulation.