News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Furnace Problem

Started by dalejensen, October 06, 2003, 05:39:00 PM

Previous topic - Next topic

dalejensen

First my bill of sale says l976 model  20/mh. It seems somewhere on truck i saw 1975. What is the make of furnace and model of futnace?  Problem is pilot light won't stay lit!  If you turn up stat right after lighting will run. Once setpoint is reached pilot dies shortly thereafter! Thanks

mollerus

I think your thermocouple on the pilot is shot.  The pilot flame warms this and it generates a minute electrical voltage that keeps the pilot on.  No voltage and the valve shuts the pilot off for safety. That is why you hold (or pull) an override switch on for 15-20 seconds while first lighting the pilot. They seem to wear out fairly often.  Go to any good RV supply store and they will have inexpensive replacements that fit all the usual brands.  Marine stores also have them. They come with instructions and are easy to replace as a do-it-yourself project.     Bob

alhnelson

Has anyone found a source for a replacement blower motor for the Coleman furnace (Model 4324-729).  My furnace blower was occasionally squealing and after removing it and pulling it apart, it appears that the shaft bushings/bearings in the motor are the problem, so would like to replace the motor. Thanks, Al