News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Running lights

Started by Plante, February 24, 2003, 01:40:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Plante

February 24, 2003, 01:40:00 AM
We purchased some of the red & orange running lights through the club.  They come with only one wire.  Before I start replacing the old ones, cutting wires, etc., is (or was there) instructions included in one of the past newsletters?

Shayne

#1
February 25, 2003, 03:48:00 PM
When you remove the old light, you will see that there are two wires attached.  The lights are designed to attach to metal (ground), so only a hot wire is part of the new light.  You just need to attach the ground to one of the mounting screws and then attach the hot wire normally.  Make sure to seal the lights good as that would be a bad place for water to get in.
Shayne Barr
ACOC #3146

Plante

#2
February 26, 2003, 12:28:00 AM
Thanks much.
Print
Go Up Pages1
User actions