Outside moulding on rear window

[JeffM]

Is there a source for replacement moulding that goes around the outside of the large rear window that holds the glass in place?

[Horst]

I think the ACOC has some.
If it has shrunk and it is pulling away from the "corners" - you can fill that in with clear silicone and smooth it into the moulding. I did that fix and it has lasted for 10+ years - no leaks. I just replace the silicone every 5 years or so - a 30 minute job -  tops.

But if your moulding is totally trashed - better to replace it.

[JeffM]

Thanks for much for your reply and advice.

[caninecaravan]

I replaced all of the moulding around the doors and windows. You can buy the moulding from the clipper club. There is usually a supply in Clip, Jr. at the national rally or order direct.