News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

vent above cab

Started by 75clipper, March 07, 2007, 10:25:30 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

75clipper

March 07, 2007, 10:25:30 AM
is there a way to fix a vent above the cab, when the windows are all up the vents seem to open up by them selfs, ony one have this too

jc from ceres, ca

Shayne

#1
March 07, 2007, 10:00:12 PM
I assume you mean while driving down the road?

You can use a small bungee cord hooked to the vent grank arm to make sure it can't turn.  Figure out where it's at when it's closed, the screw a small eye-screw in place of one of the trim screws in an appropriate place to allow the bungee cord to hold the crank arm tight closed.
Shayne Barr
ACOC #3146

JerryT

#2
March 08, 2007, 01:55:16 PM
JC
I fought with mine too! I ended up putting a new one on that I bought from the Clipper store. These vents are far from a quality piece, maybe good for the 60's/70's but minimal by todays standards. There seems to be a lot of force pushing and pulling on the vent when you drive. I used to drive with mine open but now I don't. Heres a tip that worked for me. I cut a peice of foam 1/2" bigger than the opening, I then insert it into the vent bezel when I drive at higher speeds or have the windows open. In my mind, doing this, blocks the path of the air pressure that is trying to equalize on both sides of that vent. Before the foam mine would shuck and bang and vibrate, but now, it and I are happy campers.
JerryT

bigray

#3
March 15, 2007, 05:57:33 PM
I replaced mine as well. Over time the rivets in the front of the vent lid wear. I ordered a replacement. If my failing memory serves me right I think it was Elysir or something like that. Mel or the current parts person should be able to help you find a replacement

75clipper

#4
April 16, 2007, 05:20:04 PM
if I drive mine with all the windows up some how they come open, but If I drive with one window down seem to be ok, is there a way or is to much pressure in the cab to make them stay close, the vent about the bed is the one that likes to open while driving.

JC
Print
Go Up Pages1
User actions