News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

License Plate Lights&Turn signals

Started by LarryAlida, July 21, 2002, 04:47:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

LarryAlida

July 21, 2002, 04:47:00 AM
We have a 1978 W/rear kitchen. The problem is our license lights blink with the right turn signals.I've cleaned connections,sockets etc.Any help would be appreciated.

handyman

#1
July 21, 2002, 09:34:00 AM
Larry at some point someone miss wired the plate light   with the brake light youll have to take off the taillight and find the lience plate  wire and connect it to the  running lights it allmost has to be at the tail light assy

LarryAlida

#2
July 21, 2002, 12:51:00 PM
Jim.Thank you for the quick reply.Somebody in the past wired the license lights' ground wire to the right side brake and turn hot lead.Once you get the left T/light assy.loose, you can see all the wiring.I'm back on the road again.Thank you.
Print
Go Up Pages1
User actions