News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Clutch Fan & Belts...Grrrrrrrr

Started by rlwhit, August 28, 2003, 01:37:00 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

John Mey

#15
April 23, 2004, 09:17:00 AM
Electric fans can actually hinder cooling at higher speeds as some of them impede the flow of air thru the radiator because of the fan housing bolted so close to radiator. Good in stop and go, but better off without it at cruising speeds.

junebob

#16
April 24, 2004, 12:27:00 PM
Engine cooling    
Forget about velocity and pressure for cooling.     Engine cooling is about volume of flow.     These 440s need a thermostat with a 11/2 inch passage,more if you can find one. Any less,  regardless of the temp rating don't work.A high volume water pump can not do its job if its trying to push water through to small an opening.     Good luck Bob #10
Print
Go Up Pages 1 2
User actions