News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Rear axle?

Started by Charlie, April 20, 2003, 04:45:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Charlie

April 20, 2003, 04:45:00 AM
Does anyone know what rear axle was installed in the 1979 21'?  I can not seem to identify mine by the tag attached by one of the cover bolts.  On the tag it reads 41-10 on top and 410 below.  But that doesn't tell me whether it is a limited slip that requires the Mopar Sure-Grip additive lubricant.  I drained mine and replaced the oil with 90-135 lubricant.  Any help would be appreciated.  Thanks
Charlie

RYBKA

#1
May 19, 2003, 03:48:00 AM
Hi Charlie,

I too have a 79-21.

I do not know what axle we have, but limited slip lube must be used for the limited slip device to work.

Remember, limited slip lube can be used effectively in a regular axle without fear.

vty, RYBKA #97

EKS

#2
May 19, 2003, 03:12:00 PM
The chance of the stock rear end being a limited slip axle is very unlikely. You could, as was suggested. use some kind of grease that would work in either. Consider using a synthetic. As an example big trucks have a 150,000 factory warranty that is extended to 500,000 miles if you use synthetic gear oils. The manufacturers feel that the synthetics are that much better. Also much better for heat control. I got that info from the local oil dealer yesterday while picking up mobil1 synthetic for the transmission. The extra expense up front is more than worth it from what I can tell.

EKS

#3
May 19, 2003, 03:14:00 PM
PS has any one ever researched if there is a 2 speed rear axle that would have the proper dimensions and gear ratio to work in a clipper. That would certainly help with mileage and engine wear.

junebob

#4
May 23, 2003, 01:04:00 PM
Two speed rear axle. -You could probably find an older Dodge two speed differentual/axle that would bolt up to the Clipper.If you can find a shop mechanic with nough gray to remember anythingabout 70s Mopars oryour otherhope would be the addition of an appropriate over drive installed in your drive line.If thats cost effective or not is questionable.     Bob Chaney #2626
Print
Go Up Pages1
User actions