News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Source for 1" plastic T-moulding?

Started by Bill Walker, November 25, 2002, 11:37:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Bill Walker

November 25, 2002, 11:37:00 AM
Just about have the interior on my '76 Dodge 21' Clipper finished except for replacing the broken 1" black plastic ribbed T-moulding around the dinette seats. Checked all the RV suppliers in Tucson and searched the Internet without much luck. I did find some smooth 1" black vinyl moulding but it's not all that close a match.

Anybody had in luck in locating a source for the 1" moulding?

Thanks, Bill Walker ACOC 3222

HPotter

#1
November 26, 2002, 11:52:00 AM
Unfortunately, this material has not been available for years. I found some corduroy-like rubber mat material once that looked pretty much like it and cemented it in place of some of the plastic trim.

Bill Walker

#2
December 17, 2002, 03:39:00 PM
I was afraid of that. Since I carpeted the area under the refrig, I was able to "borrow" some pieces from there to repair the damaged sections on the dinette seats. Thanks anyway.
Print
Go Up Pages1
User actions