News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

electronic speed switch (California only)

Started by KEYSJUNK, October 23, 2002, 10:46:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

KEYSJUNK

October 23, 2002, 10:46:00 AM
Can anyone tell me what this switch does?  The one on my Clipper has melted.  I'm in Florida.
Is there a way to by-pass it.  I'm having a running problem at low speed. Acts like no fuel
to the low speed end of the carb. Punch it to the
floor and the secondary opens and it takes off.
The engine will not accelerate from low speed or
idle.  Help!!!

Richard Peterson

#1
October 24, 2002, 02:26:00 AM
I don't know what carb you have but if I were you in the place you're in, I'd try to find a carburator shop to talk to.  You may have to call someone on the mainland, but it would be worth your effort.  Be sure to describe the carb you are asking about.  Good luck!  
Richard Peterson

handyman

#2
October 24, 2002, 09:11:00 AM
Im not sure what switch your talking about but what I think it is is a fuel shut off switch that shuts off the fuel when the key is truned off to prevent diseling if this is it you have to have it working or the engine wont run except full power you should be able to get one at any carb shop or even kragens or napa
Print
Go Up Pages1
User actions