News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

Cruise control

Started by KEYSJUNK, December 21, 2006, 11:19:57 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

KEYSJUNK

December 21, 2006, 11:19:57 AM
Has anyone obtained a service manual on the factory units for the Dodge Motor homes.  I have a 1977, 21ft. rear kitchen, Dodge.  440 power.  The unit engages OK, but not at the proper speed that it was set at.  If you engage it at 55 MPH, it locks in at 45 MPH.  Is there an adjustment on the unit to correct this? :?:

Robert P. Anderson

#1
January 11, 2007, 01:52:15 PM
THERE IS A SMALL SCREW IN THE CONTROL BLOCK WHERE THE SPEEDOMETER CABLES COME IN AND OUT. THIS LOOKS LIKE A CARBIATOR ADJ SCREW.  BE CAREFUL TO NOT MOVE THE SCREW  TOO MUCH. THE SCREW IS HARD TO FIND. IT RUNS SIDEWAS ON
THE TRANSMITION SIDE  OF THE CONTROL BLOCK  :D
Print
Go Up Pages1
User actions