American Clipper Owners Club

General Discussion => Greetings => Topic started by: <Terry Adelmann> on July 14, 2003, 06:04:00 AM

Title: Kitchen faucets
Post by: <Terry Adelmann> on July 14, 2003, 06:04:00 AM
where do you get parts for a leaky faucet that wont shut off?
Title: Kitchen faucets
Post by: Richard Peterson on July 14, 2003, 11:37:00 AM
Terry, the back issues of the club newsletter contain quite a bit of information on the faucets used in the
Clippers.  If you have original equipment, that would be a good source of information.  The club has repair washers, etc. for the original kitchen faucet.  Other sources are hardware stores, and RV stores, depending on the parts you need.  (//images/smiles/icon_cool.gif)
Title: Kitchen faucets
Post by: Charlie on July 15, 2003, 04:07:00 AM
I just took mine a part last week end because it was leaking.  I cleaned it up, bought two new o-rings from OSH, put it back together using a good water resistent grease.  It dosen't leak a drop now, even with a 5 gpm pump or with the hose hooked up.  The o-rings are a 1 9/16 diameter.  Good Luck.