Print Page - Outside moulding on rear window

Title: Outside moulding on rear window
Post by: JeffM on June 01, 2009, 07:16:40 PM

Is there a source for replacement moulding that goes around the outside of the large rear window that holds the glass in place?

Title: Re: Outside moulding on rear window
Post by: Horst on June 02, 2009, 10:30:01 AM

I think the ACOC has some.
If it has shrunk and it is pulling away from the "corners" - you can fill that in with clear silicone and smooth it into the moulding. I did that fix and it has lasted for 10+ years - no leaks. I just replace the silicone every 5 years or so - a 30 minute job - tops.

But if your moulding is totally trashed - better to replace it.

Title: Re: Outside moulding on rear window
Post by: JeffM on June 06, 2009, 11:57:38 AM

Thanks for much for your reply and advice.

Title: Re: Outside moulding on rear window
Post by: caninecaravan on June 08, 2009, 10:22:17 PM

I replaced all of the moulding around the doors and windows. You can buy the moulding from the clipper club. There is usually a supply in Clip, Jr. at the national rally or order direct.

American Clipper Owners Club

Tech Forum => Tech Forum => Topic started by: JeffM on June 01, 2009, 07:16:40 PM