American Clipper Owners Club

Tech Forum => House Electrical Work => Topic started by: Goody1955 on July 07, 2016, 06:26:14 PM

Title: Water pump & battery power switch
Post by: Goody1955 on July 07, 2016, 06:26:14 PM
Hello, my switch needs to be replaced. My local RV store did not have what I needed. While we we'er out RVing this 4th July my wife turned on the pump when she tried to turn it off it would not click off, so I broke out some wd40 and was able to turn it off, but the pump would not come back on. When we got back home I took the screws out of the panel to see if I could do anything while I was messing around with it the pump came on but when I switch to the left to check battery level it dose not work. So the pump right now goes on and off but no battery level check.Anyone have an idea where I can find this kind of switch it has 5 terminals
Thanks Cliff & Karin Goodman Paso Robles CA. 77 440 rear kitchen.
Title: Re: Water pump & battery power switch
Post by: Clipper Joe on July 11, 2016, 09:41:46 PM
Hi Cliff,
Sorry To Hear You Had Problems On Your RV Outing.
All Those Switches Are 12 Vdc, The Battery Check Meter Is Available At ACOC
Supply Officer Mel. Do Not Know Pricing.
I Have A Spare But Will Like To Keep For My 1977 Clipper.
These Electrical Parts Are Getting Harder To Come By.
The Switches Are Sold At A Real Good Hardware Store.

Good Luck & Let Us Know How You Make Out.
Keep Us Posted.
Joe
Title: Re: Water pump & battery power switch
Post by: Goody1955 on July 13, 2016, 09:45:05 PM
Ok Joe thanks for the info.