News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

spare tire mounting

Started by Tom Aber, February 12, 2003, 12:38:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Tom Aber

February 12, 2003, 12:38:00 AM
I have recently purchased a Clipper and have noticed on the web site that they didn't have the spare mounted on the back. It would be helpful to me to move it because of the size of my RV port and also to accomidate a cargo carrier (receiver mounted). Any info on where it should/could be would be great. It may have been moved because a trailer hitch system from the previous owner (to Clipper site specs) was installed. Thanks.

handyman

#1
February 12, 2003, 06:30:00 AM
Look under the Generator door area it was located there a on a really weired carrier

Tom Aber

#2
February 14, 2003, 02:38:00 PM
I saw the area underneath sort of between the underside of the generator housing and the passenger side door nestled up next to the tailcone of the trannie. There was what looked like a couple of nuts welded to the frame, one about 1/2 inch deep and the other normal size. Is this where the carrier bolted to the frame with some sort of threaded rod? If anyone has more info it would be appreciated. If anyone is local to Orange/LA counties, I could certainly make the drive to see it in person. Thanks for any help!
Print
Go Up Pages1
User actions