News:

The club is no longer active.  The forum will continue to be available for folks to find information and ask for help.
The tech forums are now open to all.  Other vintage Dodge-based class C owners welcome.

Main Menu

Kitchen faucets

Started by <Terry Adelmann>, July 14, 2003, 06:04:00 AM

Previous topic - Next topic

<Terry Adelmann>

where do you get parts for a leaky faucet that wont shut off?

Richard Peterson

Terry, the back issues of the club newsletter contain quite a bit of information on the faucets used in the
Clippers.  If you have original equipment, that would be a good source of information.  The club has repair washers, etc. for the original kitchen faucet.  Other sources are hardware stores, and RV stores, depending on the parts you need.  
Richard Peterson

Charlie

I just took mine a part last week end because it was leaking.  I cleaned it up, bought two new o-rings from OSH, put it back together using a good water resistent grease.  It dosen't leak a drop now, even with a 5 gpm pump or with the hose hooked up.  The o-rings are a 1 9/16 diameter.  Good Luck.