News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

fresh water sender

Started by Disneyjames, February 20, 2006, 07:08:31 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Disneyjames

February 20, 2006, 07:08:31 PM
Just picked up a 1980 Clipper..only thing that dosn't work is the fresh water sender. Anyone know where I could get a replacement? There are 2 rods with a couple resistors and springs in them...

LARRY RAY

#1
February 23, 2006, 01:28:49 PM
YOU MIGHT TRY WHAT I DID AND IT WORKS. THE SPRINGS ORIGINALLY WERE ON A SMALL PROTRUSION ON THE INSIDE OF THE TUBE. CLEAN THEM REAL GOOD IN C L R, AND THEN GENTLY STRETCH THE SPRINGS TO THE BOTTOM OF THE TUBE. YOU WILL HAVE TO CALIBRATE, BY FILLING TANK AND WATCH THE LEVEL OF WATER AND THEN RECALIBRATE A COUPLE OF TIMES, BUT IT WILL WORK IF YOU HAVE THE PATIENCE. (BE CAREFUL, THE SPRINGS WILL COME OFF THE STUD AND THEN YOUR BACK TO SOUTHERN ENGINERRING, BUT IT CAN BE DONE)
ACOC# 3514
1978--821F-- ser#48851 440 Dodge  Built on a Dream--Still a Dream.  Let's all keep it that way.
Print
Go Up Pages1
User actions