News:

This website's purpose is to share information with clipper owners and others who are interested in clippers or have old Dodge B300 chassis motorhomes.  In an attempt to share as much information as possible to as many people as possible PLEASE first post your questions in one of the forum boards rather than sending a PM to the webmaster or another member. This will allow other members to find information that may help solve their problem.  By PMing your questions, you decrease forum activity and create more work for active members who end up repeating information to individuals looking for the same information.  Thank you.

Main Menu

For HPotter

Started by AndyIlles, November 25, 2003, 03:07:00 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AndyIlles

November 25, 2003, 03:07:00 AM
Thank you for having taken the time to get me on the right track with my "charging" problem.

I've isolated the short to the large, red, 10 ga wire with the inline fuse that runs from the battery to the bottom right of the chassis connector, but inside, it disappears into a harness... can't find where it comes out.  Removing fuses, headlight/wiper/heat-ac connectors one at a time makes no difference.. still a heavy drain.  Any chance you (or any other Clip) have a schematic, showing where that thing goes from the large harness?

My direct Email address is AndyIllesTwo@AOL.com  Any help is GREATLY appreciated... it's a bummer not being able to restart after dumping the tanks.

Thanx again, Andy

Tyler Hoodenpyle

#1
November 25, 2003, 01:44:00 PM
Ask Clip Jr. for help... The club sells wiring schematics for Clipper coaches.  Otherwise look to Dodge chassis manual for help if you don't think your electrical draw concerns the coach.  Someone mentioned it earlier and I have used this resource before...Bishkobooks.com or ebay has service manuals for sale from time to time.  Good luck...
Print
Go Up Pages1
User actions